SIP Silvercut Side Disc Mowers – With or Without Conditioner

(1 customer review)

The rear-mounted side mowers with a hydro-pneumatic suspension system for cutter bar relief enable even and efficient mowing. Available without conditioners or a choice of finger or disc conditioners, SIP mowers offer great range of mowers in sizes to suit every application.

Choose from:

SILVERCUT DISC S – The rear-mounted side mowers with a hydro-pneumatic suspension system for cutter bar relief enable even and efficient mowing.

SILVERCUT DISC S FPC/FSC – A finger conditioner with plastic (FPC) or steel (FSC) fingers damages the waxy epidermis of the leaves and stems and breaks the stems, thus allowing faster moisture loss. During conditioning, it lifts the grass and forms an airy windrow behind the mower.

SILVERCUT DISC S RRC – The roller rubber conditioner (RRC) smashes the stems and opens them lengthwise, thus allowing rapid loss of moisture. This type of conditioning is recommended for alfalfa and clover forages as it does not damage the delicate leaves and preserves the nutritional value of forage.

Finance available











    Enquire Now
    Category:

    Features

    • SEQUENTIAL LIFT OF CUTTER BAR – SL
      Hydraulic stabilisation (HS) enables the sequential lift (SL) of the cutter bar. The inside of the cutter bar is lifted first, and then the outside of the cutter bar.
    • DIRECT DRIVE
      Direct drive to the first disc via a PTO shaft, angle drive and double PTO joint.
    • COLLISION SAFETY SYSTEM – CSS
      The collision safety system (CSS) is released immediately in the event of a collision with an obstacle. The special position of the hinge enables the cutter bar to move simultaneously backward and upward. After colliding with an obstacle, the cutter bar automatically returns to the operating position.

    Tech Spec

    SILVERCUT DISC 300 S – Without Conditioner

    • Working width: 2.90
    • Number of discs: 7
    • Number of blades: 14
    • Weight: 1050 kg
    • Required Tractor power: 46/61 hp
    • Capacity: 3.50
    • Transport width: 1.86 m
    • Three point linkage Cat II & III
    • Friction safety clutch and freewheel clutch
    • CSS – Collision safety system
    • Spare blades and safety brass pins
    • Hydro-pneumatic suspension
    • Angle drive, PTO shaft and double universal joint
    • 1 x single-acting hydraulic connection (1SA), 1 x double-acting hydraulic connection (1DA)
    • QCS – Quick change system and QCS tool
    • Foldable protective curtains

    SILVERCUT DISC 340 S – Without Conditioner

    • Working width: 3.25 m
    • Number of discs: 8
    • Number of blades: 16
    • Weight: 1080 kg
    • Required Tractor power: 54/72 hp
    • Capacity: 4.00
    • Transport width: 1.86 m
    • Three point linkage Cat II & III
    • Friction safety clutch and freewheel clutch
    • CSS – Collision safety system
    • Spare blades and safety brass pins
    • Hydro-pneumatic suspension
    • Angle drive, PTO shaft and double universal joint
    • 1 x single-acting hydraulic connection (1SA), 1 x double-acting hydraulic connection (1DA)
    • QCS – Quick change system and QCS tool
    • Foldable protective curtains

    SILVERCUT DISC 380 S – Without Conditioner

    • Working width: 3.67 m
    • Number of discs: 9
    • Number of blades: 18
    • Weight: 1140 kg
    • Required Tractor power: 60/80 hp
    • Capacity: 4.50
    • Transport width: 1.86 m
    • Three point linkage Cat II & III
    • Friction safety clutch and freewheel clutch
    • CSS – Collision safety system
    • Spare blades and safety brass pins
    • Hydro-pneumatic suspension
    • Angle drive, PTO shaft and double universal joint
    • 1 x single-acting hydraulic connection (1SA), 1 x double-acting hydraulic connection (1DA)
    • QCS – Quick change system and QCS tool
    • Foldable protective curtains

    SILVERCUT DISC 300 S FPC – WITH FINGER CONDITIONER

    • Working width: 2.90 m
    • Number of discs: 7
    • Number of blades: 14
    • Weight: 1310 kg
    • Required Tractor power: 60/80 hp
    • Capacity: 3.50
    • Transport width: 1.86 m
    • Three point linkage Cat II & III
    • Friction safety clutch and freewheel clutch
    • Disc rotation in pairs
    • CSS – Collision safety system
    • Spare blades and safety brass pins
    • Hydro-pneumatic suspension
    • Angle drive, PTO shaft and double universal joint
    • Finger plastic conditioner
    • DDSS – Disc drive safety system
    • QCS – Quick change system and QCS tool
    • Foldable protective curtains

    SILVERCUT DISC 300 S FSC – WITH FINGER CONDITIONER

    • Working width: 2.90 m
    • Number of discs: 7
    • Number of blades: 14
    • Weight: 1310 kg
    • Required Tractor power: 60/80 hp
    • Capacity: 3.50
    • Transport width: 1.86 m
    • Three point linkage Cat II & III
    • Friction safety clutch and freewheel clutch
    • Disc rotation in pairs
    • CSS – Collision safety system
    • Spare blades and safety brass pins
    • Hydro-pneumatic suspension
    • Angle drive, PTO shaft and double universal joint
    • Finger Steel conditioner
    • DDSS – Disc drive safety system
    • QCS – Quick change system and QCS tool
    • Foldable protective curtains

    SILVERCUT DISC 340 S FSC – WITH FINGER CONDITIONER

    • Working width: 3.25 m
    • Number of discs: 8
    • Number of blades: 16
    • Weight: 1394/1500 kg
    • Required Tractor power: 68/90 hp
    • Capacity: 4.00
    • Transport width: 1.86 m
    • Three point linkage Cat II & III
    • Friction safety clutch and freewheel clutch
    • Disc rotation in pairs
    • CSS – Collision safety system
    • Spare blades and safety brass pins
    • Hydro-pneumatic suspension
    • Angle drive, PTO shaft and double universal joint
    • Finger Steel conditioner
    • DDSS – Disc drive safety system
    • QCS – Quick change system and QCS tool
    • Foldable protective curtains

    SILVERCUT DISC 340 S FPC – WITH FINGER CONDITIONER

    • Working width: 3.25 m
    • Number of discs: 8
    • Number of blades: 16
    • Weight: 1394/1500 kg
    • Required Tractor power: 68/90 hp
    • Capacity: 4.00
    • Transport width: 1.86 m
    • Three point linkage Cat II & III
    • Friction safety clutch and freewheel clutch
    • Disc rotation in pairs
    • CSS – Collision safety system
    • Spare blades and safety brass pins
    • Hydro-pneumatic suspension
    • Hitch S-FLOW
    • Angle drive, PTO shaft and double universal joint
    • Finger Plastic conditioner
    • DDSS – Disc drive safety system
    • QCS – Quick change system and QCS tool
    • Foldable protective curtains
    • Hitch Silvercut Disc F FC/RC- Classic – longer

    SILVERCUT DISC 270 S RRC – WITH ROLLER CONDITIONER

    • Working width: 2.47 m
    • Number of discs: 6
    • Number of blades: 12
    • Weight: 1000 kg
    • Required Tractor power: 52/70 hp
    • Capacity: 3.00
    • Transport width: 1.86 m
    • Three point linkage Cat II & III
    • Friction safety clutch and freewheel clutch
    • Rubber roller conditioner
    • DDSS – Disc Drive safety system
    • QCS – Quick change tool system and tool
    • Angle drive, PTO shaft and double universal joint
    • 1 x single acting hydraulic connection and 1 x double acting hydraulic connection
    • Foldable protective curtains
    • CCS – Collision safety system
    • Spare blades and safety brass pins
    • Hydro-pneumatic suspension

    SILVERCUT DISC 300 S RRC – WITH ROLLER CONDITIONER

    • Working width: 2.9 m
    • Number of discs: 7
    • Number of blades: 14
    • Weight: 1420 kg
    • Required Tractor power: 60/80 hp
    • Capacity: 3.50
    • Transport width: 1.86 m
    • Three point linkage Cat II & III
    • Friction safety clutch and freewheel clutch
    • Rubber roller conditioner
    • DDSS – Disc Drive safety system
    • QCS – Quick change tool system and tool
    • Angle drive, PTO shaft and double universal joint
    • 1 x single acting hydraulic connection and 1 x double acting hydraulic connection
    • Disc rotation in pairs
    • Foldable protective curtains
    • CCS – Collision safety system
    • Spare blades and safety brass pins
    • Hydro-pneumatic suspension

    SILVERCUT DISC 340 S RRC – WITH ROLLER CONDITIONER

    • Working width: 3.32 m
    • Number of discs: 8
    • Number of blades: 16
    • Weight: 1524 kg
    • Required Tractor power: 68/90 hp
    • Capacity: 4.00
    • Transport width: 1.86 m
    • Three point linkage Cat II & III
    • Friction safety clutch and freewheel clutch
    • Rubber roller conditioner
    • DDSS – Disc Drive safety system
    • QCS – Quick change tool system and tool
    • Foldable protective curtains
    • Angle drive, PTO shaft and double universal joint
    • 1 x single acting hydraulic connection and 1 x double acting hydraulic connection
    • Disc rotation in pairs
    • CCS – Collision safety system
    • Spare blades and safety brass pins
    • Hydro-pneumatic suspension

    Delivery

    It is our business policy that all John Deere Machinery is handed over by one of our trained professionals, to ensure you, the customer receive the best possible experience when purchasing any John Deere Equipment.

    All Ride-on Mowers, Agricultural & Commercial Machinery can be delivered within the South West of England.

    Local Collection in person, is also available from one of our depots in Exebridge – Somerset, Chudleigh – Devon or St.Columb in Cornwall.

    1 review for SIP Silvercut Side Disc Mowers – With or Without Conditioner

    1. Mr H from Axminster, Devon –

      Bought a SIP 300S at the start of the season. Also have a SIP Tedder. Would recommend SIP products, Very pleased with it

    Add a review

    Your email address will not be published. Required fields are marked *